Guides
6 min readUpdated
Single acting describes a leaf opening to one side of its closed position; double acting permits both sides. Compare the complete swing, support and closing arrangement before choosing hardware.
At a glance
- Single acting and double acting describe a leaf's permitted swing.
- Support, closing control, frame stops and securing need to suit the arrangement.
- Changing swing is a complete opening decision, not an assumed hinge swap.
The difference is where each leaf can swing
A single acting commercial door opens to one side of its closed position. A double acting door can open to either side. These terms describe the movement of a leaf, not whether the doorway contains one door or a pair. The Steel Door Institute's current nomenclature defines single acting and double acting by opening direction.
The practical choice concerns the complete arrangement: the swing path, frame and stops, supporting hinges or pivots, and closing control must work together. A closer described as double acting does not establish that the surrounding door and frame permit that movement.
Follow the movement from a fixed viewpoint
Use two named sides, A and B, rather than saying that the door opens both ways. Imagine a manual door between those spaces, with the leaf at its normal closed position. The following comparison assumes any latch has been released for ordinary passage. It describes intended movement, not a test to perform on an unfamiliar door.
Single acting, opening into B. From A, a person pushes the leaf into B. From B, a person pulls it into B. People can travel through the doorway in either direction, although the leaf opens only into B.
Double acting. From A, the released leaf can be pushed into B. From B, the same leaf can be pushed into A. The intended opening paths lie on opposite sides of the closed position.
Return movement. Where controlled closing is provided, the single acting leaf returns from its permitted opening side. A double acting arrangement needs closing control suited to returning from either opening side toward the intended closed position.
Space around the opening. Mark the occupied swing area on the relevant side or sides. Consider people approaching, adjacent doors, furniture and equipment passing through. A double acting leaf has a moving path to consider on both sides; the term alone says nothing about whether those paths suit the site.
This distinction prevents a common planning error: two-way pedestrian traffic does not, by itself, call for a door that swings to both sides.
Separate the closed-position stop from the opening travel limit
On a conventional stopped single acting frame, the projecting stop provides the closed-position boundary. A leaf cannot simply swing through that obstruction to the opposite side. A double acting arrangement needs a frame and edge relationship that permits its intended paths through the closed position. The single acting and double acting sketches on page 1 of dormakaba's centre-hung package instructions illustrate that difference for those applications.
The closed-position frame stop and an auxiliary opening stop have different purposes. An opening stop limits how far the door travels when opened. A double acting doorway can therefore need opening travel stops even though it cannot have an ordinary frame stop obstructing its movement through the closed position.
For example, the dormakaba BTS80 brochure, Technical details calls for an auxiliary stop where hardware or adjacent structures interfere with maximum opening. That is a product application condition, not a universal opening angle for every doorway.
Do not remove a frame stop or force a leaf past its intended closed position to discover whether it could become double acting. The actual construction and selected system need assessment first.
Support and closing control are separate selection questions
The support arrangement carries and locates the moving leaf. The closing arrangement controls its return. Some assemblies bring those functions together around a floor closer and pivots; others use a different combination. Identify both functions rather than treating a visible floor plate as a complete specification.
A centre-hung pivot arrangement is not proof of double acting operation. The dormakaba BTS Applications and Accessories brochure, pages 2 and 3 lists centre-hung packages for both single acting and double acting doors. Its aluminum-door examples use different spindles for those two applications, although several other listed components are shared. Similar appearance does not establish identical operation.
Double acting closing control is not confined to the floor. The LCN 6030 product information describes a double acting closer mounted in the frame with a concealed track in the door. Equipment location and permitted swing are separate facts to confirm.
For an existing door that drops, scrapes or moves at its supports, commercial hinge and pivot repair is the relevant assessment route. The door closer guide explains closing control and fault reporting without making the swing arrangement a diagnosis.
Choose the arrangement from the intended passage
Begin with the task people need to complete. Do they need ordinary passage from both sides, or specifically to push the same leaf away from either approach? Describe trolley or equipment movement, nearby queues and any controlled access. Keep that intended use separate from the behaviour of a worn or damaged door.
Ask the assessor to resolve four connected questions:
- Permitted movement: Which side or sides of the closed position should each leaf open into?
- Physical arrangement: Do the leaf edges, frame, support and surrounding space suit those paths?
- Return and securing: What brings the leaf back, and what latching or locking function is required afterward?
- Project requirements: Who confirms the applicable exit, accessibility and any fire or smoke requirements for this opening?
Manufacturer examples explain how particular products are arranged. They do not decide whether double acting operation is appropriate for a Toronto building or a particular exit. Where a different arrangement is proposed, commercial door installation covers assessment of the leaf, frame and hardware scope. The proposal should identify the intended movement before components are ordered.
Questions about single acting and double acting doors
Is a pair of commercial doors automatically double acting?
No. A pair describes two leaves. Single acting or double acting describes the permitted swing of each leaf. Ask for each leaf's movement to be stated separately, especially if the two leaves have different everyday roles.
Is double acting the same as double egress?
No. The Steel Door Institute defines double egress as a pair whose leaves swing in opposite directions within the same frame plane. That describes the pair's arrangement; it does not mean that either individual leaf can open to both sides of its closed position.
Does a centre-hung door always swing both ways?
No. The BTS package examples include centre-hung single acting as well as double acting arrangements. Confirm the actual application, components and frame details rather than infer the movement from the pivot position or floor cover.
Does every double acting door need a floor closer?
No. The LCN 6030 is an example of double acting closing control concealed in the frame. A suitable complete system needs to be identified for the actual opening; this example is not a replacement recommendation.
If a door now swings past its closed position, is it double acting?
Unexpected movement does not establish the original design. It could be a changed operating condition that needs assessment. Keep people clear of uncontrolled movement and report what changed; do not force the door farther to classify it.
Can changing the closer alone change the acting arrangement?
Do not assume so. The frame, door edges, support, travel limits and securing arrangement also affect permitted movement. Have the complete opening assessed before approving a different operating arrangement. A closer's description alone does not confirm that the existing assembly can perform it.
























