Jordan Kaufman

“What a wonderful company, David looked after my issues with 4 doors so quickly and professionally I couldn’t be more happy. Total gentleman and the company is responsible and timely with appointments and booking. You can’t go wrong!”
Open
Residential and commercial · Peel Region
Arrange an assessment of an existing residential or commercial door in Brampton. We identify the movement, support and securing complaint, distinguish temporary protection from permanent repair, and clarify any proposed change to the entrance.
Leave your details and get $50 off your first repair.
Original customer reviews
Customer reviews
Relevant customer work from across our service area. These reviews are not presented as jobs from this specific city.
Open a review to read the original customer feedback.
Read more customer reviews






















Work at these locations includes jobs through facilities contractors. Logos belong to their owners; no affiliation, sponsorship or endorsement is implied.
Our service
A door that sticks, drags on the floor or will not latch may have a hardware, alignment or frame problem.
We start with the reveal, the gap running around the door, which should stay even from top to bottom. Uneven gaps point to hinge wear, a racked frame or a settled floor. We check hinge screws, jamb plumb and strike position before touching anything, so the repair addresses the cause rather than the symptom.
Loose or worn hinges can make a door stick. We check the hinges, fixings and frame alignment before choosing the repair. Depending on the fault, we secure the fixings, adjust the door or replace damaged hinges.
If a door needs pulling or lifting unexpectedly to lock, we assess its support, latch and strike together. Some multipoint locks require the handle to be lifted as part of normal operation. We identify the mechanism and cause before recommending alignment work or replacement hardware.
Torn or compressed weatherstripping is the usual source of a draft you can feel with your hand. We fit jamb seal in the correct profile for your frame, replace the door sweep, and reset an adjustable threshold so it seals without dragging the sweep to pieces. Rotted sill wood is rebuilt before new seal goes on.
We inspect damaged jambs, frames and door slabs before recommending repair or replacement. The assessment considers the extent of the damage, the condition of the fixing points and any fire rating or security requirements. Reinforcement, patching or adjustment is considered only where suitable for that door and frame; otherwise we explain the replacement scope.
On commercial and multi-unit doors we adjust the closer arm for sweep speed, latch speed and backcheck so the door shuts fully without slamming. Leaking closers are replaced rather than topped up. We also service panic hardware, floor pivots and hold-open arms, and set closing force light enough to stay comfortable to use.
Brampton includes newer subdivisions alongside an older downtown core near Main and Queen.
Every job starts with a diagnosis and a price you approve before work begins. What moves the number is which hardware failed, whether the part is stocked or has to be matched and ordered, the condition of the frame, and after-hours callouts.
Door repair in Brampton begins with the actual opening and the complaint affecting its use. Is the leaf scraping the threshold, missing its latch opening, moving against loose hardware or closing unpredictably? Explain whether the door is a house entrance, an interior passage, a suite door or a business entrance. Describe any visible impact damage and whether the entrance can currently be secured. A photograph of a handle is useful preparation, but it does not identify the support and framing behind an operating fault.
Door N Window serves residential and commercial properties throughout Brampton and provides door and window services across the GTA. We are insured and WSIB Covered, with 24/7 availability and same-day service available. An available assessment is different from a promise that an unidentified permanent component can be installed immediately. If the opening is unsecured, tell us at first contact so the securing problem is clear before the longer repair scope is agreed.
After an impact or forced entry, a door may have more than a broken lock. Look from a safe position for splitting or deformation at the receiving side, visible hinge movement and a leaf that no longer sits in its opening. Do not remove supporting parts or force a damaged door through repeated operating cycles. The assessment needs to establish whether the frame, leaf and retaining hardware are suitable to remain, not simply fit a new handle where damage is most obvious.
Ask the proposal to identify the components being repaired, adjusted or replaced. If a damaged frame cannot support the retained leaf, that condition should be explained before hardware is ordered. For paired doors, identify which leaf normally opens first and how the other is held closed. The receiving relationship matters: changing hardware on one side without checking the opposite support and meeting edges can leave a different securing fault unresolved. Retained components need to be appropriate for the finished agreed scope.
Brampton's heritage management guidance says work likely to alter a heritage attribute requires a Heritage Permit. For an applicable property, establish which entrance features are included in its designation information before approving removal or changed appearance. A repair brief should distinguish a worn component from a proposal to replace the whole door, alter its glazing pattern or change surrounding architectural details.
The City's Part IV Heritage Permit Kit explains that a relatively small project such as front-door replacement may need approval when it affects heritage attributes. It also explains that the process concerns the property and exterior elevations rather than only the front facade. A rear or side entrance should therefore not be treated as automatically outside the question. Ask City Heritage staff about the actual proposed work and keep their direction with the door specification.
If the existing entrance can be repaired while retaining its relevant features, the assessment should explain what physical work is proposed. If a new leaf or altered opening is recommended, that is a different decision with a different description. Keep the entrance's existing appearance, proposed changes and property permission information together. Do not assume a familiar replacement model can be substituted simply because its nominal width matches the old door.
For a heritage property, check the property's own designation or applicable requirements instead of relying on a general neighbourhood label or an unadopted study document. Ask the City when the proposal is uncertain. Property permission, a suitable mechanical repair and any wider building requirements are separate parts of preparing the work. Ordering a component before those questions are settled can create an avoidable mismatch between what was approved, what arrives and what can be installed.
For a Brampton shop, office, clinic or other workplace, identify the entrance's role and the authorized coordinating contact. Explain whether the complaint affects customer access, staff passage or securing at the end of the working day. A closer complaint, dragging leaf, damaged hinge and failed latch may involve different components. The commercial door repair guide explains the support and hardware assessment rather than treating every business entrance as a single interchangeable door.
Tell us if an operator, activation device or access-control system is fitted. Keep its behaviour separate from the underlying movement or support complaint. The automatic door repair service covers powered operation, while a leaf that catches against its frame needs its mechanical condition established. Provide known product information without opening housings or altering settings. The repair plan should identify the affected functions and any additional work, instead of declaring the whole entrance restored after only one function responds.
For a condominium, apartment building or another managed property, identify whether the door is within a suite or part of a shared entrance arrangement. Ask the authorized building contact to clarify responsibility, specifications and approval for component changes. A resident's access to a key does not settle those matters. If management has an existing door or hardware specification, provide it before a replacement is selected so its preparation and intended use can be checked.
Explain the route to the opening, known contractor access procedures and any working-area restriction. The coordinating person should describe how residents, customers or staff will use another authorized route when necessary. Do not wedge or alter shared door functions to simplify the repair appointment. Where the fault affects safe use, report it promptly to the responsible property contact. The visit addresses the agreed door condition; it does not certify every unrelated system or requirement in the building.
If the main damage is a glass panel, describe the glazing and any associated frame or operating damage through door glass replacement. A cracked panel does not establish that the leaf's supporting components remain suitable. Fixed shopfront glazing belongs with Brampton storefront glass. The supporting arrangement and handling plan can differ from those of a hinged door, even when both openings contain similar-looking glass.
Sliding patio doors use tracks and supporting rollers rather than the same arrangement as a hinged entrance. The Brampton patio door repair page covers movement and locking complaints for that assembly. If several openings are involved, list them individually and identify the symptom at each. Matching dimensions or handles do not prove that their internal components match. A clear opening list supports assessment without guessing parts from another door.
Before work begins, agree which identified components and operating functions are included. Afterwards, review the normal movement, closing and securing functions covered by that scope with the technician and coordinating contact. Keep temporary protection or parts awaiting supply identified separately from permanent repair. If an insurance claim is involved, we can help document the damage and agreed work; coverage and reimbursement are determined by the insurer and policy.
Read project descriptions and original customer feedback about door, window and glass work.
View project descriptionsExplore repair options for doors, windows and glass. Explore our services.
How it works
Call or send the details. Photos are helpful, but optional.
We assess the job on site. You approve the price before paid work starts.
We secure unsafe openings and arrange the agreed repair or installation.
An itemised invoice describing the work.
Door, window and glass work for homes and businesses. Insured, WSIB Covered and available 24/7.
Insurance claims
After a break-in or property damage, we help with paperwork describing the damage and repair.
Coverage and reimbursement depend on your policy and your insurer's approval.
How we help with your claimService areas
Residential and commercial service across Toronto, Peel, York, Durham and Halton, plus Hamilton, Barrie and nearby communities.
FAQ
Local answers first, then the ones that apply everywhere.
Yes. We serve residential and commercial properties throughout the city and across the GTA. Explain which opening is affected and what prevents its normal use.
That may be possible where the leaf and supporting frame remain suitable. The assessment identifies the required support, alignment or hardware work before confirming the retained components.
Explain whether the opening can be secured and describe visible damage to the leaf, receiving frame and hinges from a safe position. Do not remove support or force the damaged door repeatedly.
Yes. The City explains that even a smaller project can require approval when it affects protected heritage attributes. Confirm the property and proposed change with Heritage staff.
No. The City Part IV permit kit explains that the process concerns the property and exterior elevations, rather than only the front facade. Confirm the affected attributes and scope.
Yes. Describe the entrance function, closing or locking complaint and authorized contact. Support, alignment and compatible components need assessment together.
Report activation behaviour separately from movement, support or locking faults. Operator work and mechanical entrance repair need their respective scope identified.
Provide the authorized building contact, specification and entry procedures. Management should clarify responsibility and permission for component changes.
Yes. An unsecured opening may need temporary attention while the permanent repair and suitable parts are confirmed. Those stages remain separately described.
We can help describe damage and repair work. Your policy and insurer determine coverage and reimbursement; approval is not guaranteed.
Also in this area
Nearby
If you are on the edge of Brampton, we cover the municipalities around it too.
Call (647) 643-5837 and describe what is happening, or send a photo through the form.