Chris Oakes

“Great work, was able to repair our doors on the spot. Would recommend”
Open
Residential and commercial · Peel Region
Restore the operation of an existing door with the leaf, supporting frame and hardware assessed together. We repair residential and commercial doors throughout Mississauga, with the repair scope distinguished from glass replacement, automatic controls and a complete new entrance.
Leave your details and get $50 off your first repair.
Original customer reviews
Customer reviews
Verified customer jobs in Mississauga come first, followed by related work from across our service area. Open a review for its original feedback and photos.
Open a review to read the original customer feedback.
Read more customer reviews






















Work at these locations includes jobs through facilities contractors. Logos belong to their owners; no affiliation, sponsorship or endorsement is implied.
Our service
A door that sticks, drags on the floor or will not latch may have a hardware, alignment or frame problem.
We start with the reveal, the gap running around the door, which should stay even from top to bottom. Uneven gaps point to hinge wear, a racked frame or a settled floor. We check hinge screws, jamb plumb and strike position before touching anything, so the repair addresses the cause rather than the symptom.
Loose or worn hinges can make a door stick. We check the hinges, fixings and frame alignment before choosing the repair. Depending on the fault, we secure the fixings, adjust the door or replace damaged hinges.
If a door needs pulling or lifting unexpectedly to lock, we assess its support, latch and strike together. Some multipoint locks require the handle to be lifted as part of normal operation. We identify the mechanism and cause before recommending alignment work or replacement hardware.
Torn or compressed weatherstripping is the usual source of a draft you can feel with your hand. We fit jamb seal in the correct profile for your frame, replace the door sweep, and reset an adjustable threshold so it seals without dragging the sweep to pieces. Rotted sill wood is rebuilt before new seal goes on.
We inspect damaged jambs, frames and door slabs before recommending repair or replacement. The assessment considers the extent of the damage, the condition of the fixing points and any fire rating or security requirements. Reinforcement, patching or adjustment is considered only where suitable for that door and frame; otherwise we explain the replacement scope.
On commercial and multi-unit doors we adjust the closer arm for sweep speed, latch speed and backcheck so the door shuts fully without slamming. Leaking closers are replaced rather than topped up. We also service panic hardware, floor pivots and hold-open arms, and set closing force light enough to stay comfortable to use.
Mississauga runs from the low-rise postwar streets of Cooksville and Clarkson to the high-rise condo cluster around Square One, with Port Credit's older lakeside homes in between.
Every job starts with a diagnosis and a price you approve before work begins. What moves the number is which hardware failed, whether the part is stocked or has to be matched and ordered, the condition of the frame, and after-hours callouts.
For door repair in Mississauga, start with what has stopped working and whether the entrance can be secured. A handle photograph alone can miss the reason a door catches, slams or fails to latch.
Explain whether the problem developed gradually or followed an impact or forced entry. Identify a home entrance, interior door or business opening, because its use affects the repair brief.
We serve homes and businesses throughout Mississauga, including Cooksville, Erin Mills, Malton, Clarkson, Meadowvale, Port Credit and Streetsville, and carry out door and window services across the GTA. Door N Window is insured and WSIB Covered, with 24/7 availability and same-day service available. Availability does not establish that an unidentified component is in stock or that permanent work can be completed before the opening is inspected. Tell us immediately if the door cannot be secured or safely used.
When a door has dropped, its latch may strike above or below the receiving opening. Forcing the handle or repeatedly slamming the leaf can conceal the supporting problem while adding stress to other components. Explain where it rubs and whether lifting the handle changes how it closes. A technician can assess hinges, fastenings, frame condition and alignment before deciding whether a lock component also needs replacement. A new latch alone is not a complete repair if the leaf remains unsupported.
Report visible separation at a hinge, damaged screws or movement of the frame, but do not remove supporting parts to demonstrate the fault. The proposal should identify which elements can remain and what is damaged. For paired entrance doors, explain which leaf is normally active and how the second leaf is secured. The relationship between the two leaves matters; changing one component without checking the meeting edges can leave a different closing or locking fault unresolved.
For a shop, clinic, office or other commercial property, name the door and the authorized person coordinating the work. Explain whether it is the main public entrance, a staff passage or another opening. Record what happens during normal use: failure to latch, an abrupt closing movement, dragging at the threshold or a damaged frame. The commercial door repair guide explains the wider hardware and support assessment. Do not describe every shop door fault as a glass problem simply because the leaf contains glass.
Provide known closer, pivot and locking information without opening housings or altering adjustments. If the entrance has automatic assistance or access control, report both ordinary manual operation and the activation complaint. Keep those functions separately described. The automatic door repair service covers operator faults, while an entrance that is structurally misaligned still needs its support assessed. A successful button activation does not prove that a dragging leaf or failed latch has been repaired.
Before converting a repair request into a larger entrance project, define whether the opening is staying the same. Mississauga's building permit guidance distinguishes replacement of an existing same-size door from adding a door or enlarging one. The City also lists maglocks among projects requiring a permit. These are useful reasons to describe the full proposal rather than call every change a hardware repair.
Ask the City about the actual scope if new access-control equipment, a changed opening or other alterations are involved. A same-size description is not a blanket authorization for every associated change, and it does not settle separate property or heritage requirements. Keep the permission question attached to the proposed work: which door, what equipment, what opening and what intended change. That helps prevent an urgent repair enquiry from becoming an unreviewed alteration while an entrance is already out of service.
For an entrance in Streetsville, Old Port Credit Village or Meadowvale Village, establish the property's actual heritage status and applicable requirements before approving changes. The City's heritage approval guidance identifies door changes on individually designated properties as alterations requiring approval and directs owners to confirm their specific project. District properties need their applicable plan considered. A neighbourhood name alone does not establish the status or permitted work at an individual entrance.
Provide any existing direction about retaining the door's appearance, glazing arrangement or other features. Explain whether the complaint concerns operation or a requested redesign so those decisions are not blended. A repair assessment can document the observed support and hardware condition; it does not establish approval to remove a protected feature. The practical next step is a clear condition assessment alongside the property's actual permission information.
For a condominium, apartment building or other managed property, clarify whether the affected door is a suite entrance or part of a shared route. Ask the authorized building contact to confirm responsibility and any existing door or hardware specification. An occupant's ability to operate a door does not establish permission to substitute its components. Provide known building access procedures and explain whether management needs to be present when the door is assessed or the work is handed over.
Keep the work area and temporary access arrangement explicit. If customers, residents or staff need another entrance during the visit, the coordinating contact should explain that arrangement beforehand. Do not wedge a shared door open or modify an exit arrangement to make booking easier. Where a fault affects safe use, report the concern immediately and follow the building's responsible contact's direction. Photographs and written symptoms assist preparation, but they do not replace an inspection of the installed assembly or the applicable building requirements.
Broken glazing in an otherwise operable entrance needs its glass construction and support assessed. Use the door glass replacement service for that scope and explain any accompanying hinge or lock damage. A storefront's framing and larger frontage belong with Mississauga storefront glass. Those related services remain available; distinguishing them helps the technician prepare for the actual opening rather than assume the same parts and handling arrangements apply everywhere.
A sliding patio door that is difficult to move involves a different operating arrangement from a hinged entrance. Describe the track, movement and locking symptoms through Mississauga patio door repair. If several doors need attention, identify each opening separately. Repeated dimensions or similar handles are not enough to order matching replacement components. Keep the original complaint, proposed work and any outstanding follow-up items clear for every door so the final scope can be understood and checked.
Before work is agreed, ask which parts will be retained, adjusted or replaced and whether a permanent component still needs identification or supply. For the functions included in the repair, ask the technician to demonstrate:
For a paired or powered entrance, also identify the second leaf or connected equipment that was included in the work. A closing check covers the agreed repair; it does not establish that unrelated access equipment has been serviced. Record any temporary securing, outstanding component or further provider visit separately. We can help with insurance paperwork describing the damage and repair. Coverage and reimbursement remain decisions for the insurer under the policy.
Read project descriptions and original customer feedback about door, window and glass work.
View project descriptionsExplore repair options for doors, windows and glass. Explore our services.
How it works
Call or send the details. Photos are helpful, but optional.
We assess the job on site. You approve the price before paid work starts.
We secure unsafe openings and arrange the agreed repair or installation.
An itemised invoice describing the work.
Door, window and glass work for homes and businesses. Insured, WSIB Covered and available 24/7.
Insurance claims
After a break-in or property damage, we help with paperwork describing the damage and repair.
Coverage and reimbursement depend on your policy and your insurer's approval.
How we help with your claimService areas
Residential and commercial service across Toronto, Peel, York, Durham and Halton, plus Hamilton, Barrie and nearby communities.
FAQ
Local answers first, then the ones that apply everywhere.
Yes. We serve residential and commercial properties across the municipality, including Cooksville, Erin Mills, Malton, Clarkson, Meadowvale, Port Credit and Streetsville.
An assessment may identify a repair involving support, alignment or hardware. The leaf and frame must be checked before confirming what can remain.
The door may be misaligned or unsupported, or a locking component may be damaged. Describe rubbing and movement so the cause is assessed rather than assume a new lock will solve it.
Yes. Explain the entrance function, closer or locking complaint and authorized coordinating contact. Automatic operation and access control should also be described if present.
The City distinguishes an existing same-size replacement from adding or enlarging a door. Confirm the full proposed scope, including associated alterations and other property approvals, with the City where necessary.
Mississauga lists maglocks among projects requiring a building permit. Keep a proposed access-control alteration distinct from the existing mechanical repair and confirm its requirements before work.
Confirm the actual property status and applicable district plan with the City. Changes to a designated door may require heritage approval; the neighbourhood name does not establish the permission for your entrance.
Yes. Provide the authorized building contact, existing specification and access procedures. Management should clarify responsibility and permission for changes to the door or its hardware.
Yes. An unsecured opening may need temporary attention while the permanent components and scope are confirmed. We distinguish those stages rather than promise unidentified parts will be available immediately.
We can help document the damage and agreed repair work. Your insurer and policy determine coverage and reimbursement; approval is not guaranteed.
Also in this area
Nearby
If you are on the edge of Mississauga, we cover the municipalities around it too.
Call (647) 643-5837 and describe what is happening, or send a photo through the form.