Jordan Kaufman

“What a wonderful company, David looked after my issues with 4 doors so quickly and professionally I couldn’t be more happy. Total gentleman and the company is responsible and timely with appointments and booking. You can’t go wrong!”
Open
Residential and commercial · Halton Region
Have an existing residential or commercial door assessed for movement, support, closing and securing faults. We serve Burlington and distinguish a repair to retained components from a new opening, replacement glazing or a change to an entrance operating system.
Leave your details and get $50 off your first repair.
Original customer reviews
Customer reviews
Relevant customer work from across our service area. These reviews are not presented as jobs from this specific city.
Open a review to read the original customer feedback.
Read more customer reviews






















Work at these locations includes jobs through facilities contractors. Logos belong to their owners; no affiliation, sponsorship or endorsement is implied.
Our service
A door that sticks, drags on the floor or will not latch may have a hardware, alignment or frame problem.
We start with the reveal, the gap running around the door, which should stay even from top to bottom. Uneven gaps point to hinge wear, a racked frame or a settled floor. We check hinge screws, jamb plumb and strike position before touching anything, so the repair addresses the cause rather than the symptom.
Loose or worn hinges can make a door stick. We check the hinges, fixings and frame alignment before choosing the repair. Depending on the fault, we secure the fixings, adjust the door or replace damaged hinges.
If a door needs pulling or lifting unexpectedly to lock, we assess its support, latch and strike together. Some multipoint locks require the handle to be lifted as part of normal operation. We identify the mechanism and cause before recommending alignment work or replacement hardware.
Torn or compressed weatherstripping is the usual source of a draft you can feel with your hand. We fit jamb seal in the correct profile for your frame, replace the door sweep, and reset an adjustable threshold so it seals without dragging the sweep to pieces. Rotted sill wood is rebuilt before new seal goes on.
We inspect damaged jambs, frames and door slabs before recommending repair or replacement. The assessment considers the extent of the damage, the condition of the fixing points and any fire rating or security requirements. Reinforcement, patching or adjustment is considered only where suitable for that door and frame; otherwise we explain the replacement scope.
On commercial and multi-unit doors we adjust the closer arm for sweep speed, latch speed and backcheck so the door shuts fully without slamming. Leaking closers are replaced rather than topped up. We also service panic hardware, floor pivots and hold-open arms, and set closing force light enough to stay comfortable to use.
Burlington runs from Aldershot's older postwar streets and the lakeside homes of downtown up through newer subdivisions near Millcroft and the Escarpment.
Every job starts with a diagnosis and a price you approve before work begins. What moves the number is which hardware failed, whether the part is stocked or has to be matched and ordered, the condition of the frame, and after-hours callouts.
Door repair in Burlington starts with the affected entrance and what prevents its normal use. Describe where it catches, whether the latch engages, whether it closes abruptly and whether the door can currently be secured. Explain its role: a house front entrance, an interior room, a suite door or a public business entrance. Include visible damage and recent changes to the opening without guessing which component has failed. Similar-looking handles do not establish that two doors use the same hardware.
Door N Window serves homes and businesses throughout Burlington and provides door and window services across the GTA. We are insured and WSIB Covered, with 24/7 availability and same-day service available. Permanent repair depends on assessment, compatible components and access. If the entrance is unsecured, explain that first so urgent securing can be distinguished from the work needed to restore the installed assembly. An available visit does not mean an unidentified replacement is already ready for installation.
A leaf that has moved out of position can produce what appears to be a locking fault. Report rubbing at the top, side or threshold and explain whether the latch fails during ordinary closing. Do not repeatedly slam or lift a damaged door as a substitute for assessment. The technician needs to check the support, fastenings, frame and receiving hardware before selecting a replacement component. Fitting a new latch to a door that remains unsuitable for its opening may leave the original complaint unresolved.
Ask which parts are sound enough to remain and which observed damage requires work. For paired entrances, identify the usual active leaf and how the second leaf is held closed. The relationship between their meeting edges and receiving hardware matters. A repair proposal should describe both the initiating condition and any secondary damage, rather than assume the most visible broken part explains the entire fault. Keep each opening separate if several doors at the property need attention.
The City's building permit guidance identifies replacement of doors in an existing opening in a house, or an accessory building serving that house, among work not requiring a building permit. The wording identifies a building type and an existing opening. It is not a general statement that every commercial entrance alteration or newly enlarged opening is exempt. Describe the actual property and proposed work before using that distinction to plan a replacement.
If a repair recommendation becomes a larger alteration, ask what changes beyond the door itself: opening dimensions, surrounding construction, operating equipment or another part of the entrance. Confirm uncertain requirements with the City. Keep any property authorization and heritage questions separate from the building-permit enquiry. A retained opening can simplify the physical scope without resolving every other permission. Agree the repair description before ordering so the work and any required review concern the same proposal.
Burlington's Municipal Cultural Heritage Register distinguishes designated properties from non-designated register entries. For designated properties, the City directs owners to Heritage staff to establish whether an alteration needs a heritage permit. Use the actual entry and property-specific information instead of treating every older entrance, or every address on the register, as having identical restrictions. Explain the intended retained and changed features when seeking direction.
The same municipal page provides information about the Burlington Avenue and Ontario Street Heritage Conservation District and its approved plan. Check the applicable boundary and plan when that may affect the property rather than assume an entire named street has one status. Keep the City's direction with the entrance information. A proposal to retain operation and a proposal to change visible features need clear descriptions; a replacement chosen for convenience may not address the property's actual constraints.
If the door admits drafts or water, describe where the symptom appears and whether the leaf also catches or fails to latch. A sealing complaint and an operating fault can occur together, but replacing a visible weather seal does not establish that the surrounding frame or support is suitable. Report damaged threshold components, known previous work and whether the complaint appears during particular conditions. Do not remove seals or supporting hardware to discover hidden information before the assessment.
Ask the agreed scope to distinguish component sealing from damage to the door or surrounding construction. If a more extensive replacement is recommended, request the observed reason that a retained-door repair is unsuitable. Keep any further investigation or separate surrounding work explicit. A technician can assess the door-related condition without assuming every moisture symptom originates in the same component. The final proposal should explain the work being addressed and any remaining issue that has not been included.
For a Burlington business, identify the affected entrance and the authorized coordinating contact. Describe how customers and staff ordinarily use it and whether another authorized route is available during the work. A dragging leaf, worn pivot, damaged lock and inconsistent closer action require their respective components assessed. The commercial door repair guide explains that scope. A public entrance containing glass still has support and operating hardware that cannot be diagnosed from the glazing alone.
If the opening has powered assistance or access control, record those symptoms separately. Explain whether an activation device responds and whether the supported leaf also has a mechanical complaint. The automatic door repair service addresses operator faults. Keep operator work and leaf, frame or locking work clearly identified so a successful activation is not treated as proof that every entrance function has been restored. Provide known product details without opening housings or altering system settings.
For a condominium or another managed property, clarify whether the affected door is a suite entrance or shared opening. Ask the authorized building contact to establish responsibility and permitted components. A resident's key or a tenant's lease does not by itself specify which hardware may be substituted. Provide any existing door specification, contractor access procedures and working-area restrictions before the visit. Compatibility depends on the installed preparation and intended function, not only a replacement part's exterior appearance.
Keep safe access arrangements with the responsible coordinating person. Do not wedge or defeat shared closing functions to simplify an appointment. Report a fault affecting safe use promptly to the building contact. At handover, distinguish the normal functions covered by the repair from unrelated building systems or future alterations. An agreed mechanical repair does not certify every access, fire or accessibility requirement in the property; any wider project requires its appropriate review and scope.
If the principal damage is glazing within a door, use door glass replacement and report accompanying support or frame damage. Fixed shopfront framing belongs with Burlington storefront glass. Sliding patio movement belongs with Burlington patio door repair, where the track and supporting rollers differ from a hinged entrance. Selecting the correct assembly helps prepare the visit without assuming every transparent panel or entrance has interchangeable components.
Before work begins, agree the retained parts, proposed replacements and intended operating functions. Review movement, closing and securing relevant to that scope after the work with the technician and coordinating contact. Keep temporary protection or parts still awaiting supply separate from permanent repair. We can help with paperwork describing damage and the agreed work for an insurance claim; coverage and reimbursement remain decisions under the insurer's policy.
Read project descriptions and original customer feedback about door, window and glass work.
View project descriptionsExplore repair options for doors, windows and glass. Explore our services.
How it works
Call or send the details. Photos are helpful, but optional.
We assess the job on site. You approve the price before paid work starts.
We secure unsafe openings and arrange the agreed repair or installation.
An itemised invoice describing the work.
Door, window and glass work for homes and businesses. Insured, WSIB Covered and available 24/7.
Insurance claims
After a break-in or property damage, we help with paperwork describing the damage and repair.
Coverage and reimbursement depend on your policy and your insurer's approval.
How we help with your claimService areas
Residential and commercial service across Toronto, Peel, York, Durham and Halton, plus Hamilton, Barrie and nearby communities.
FAQ
Local answers first, then the ones that apply everywhere.
Yes. We serve residential and commercial properties throughout Burlington and across the GTA. Identify the opening and what prevents its normal use.
It may remain where its condition and supporting frame are suitable. Assessment identifies the support, alignment or component work before confirming that scope.
Support or frame alignment may be affecting engagement, or hardware may also be damaged. Report the rubbing and latching symptoms together so the cause is assessed.
The City lists replacement in an existing opening in a house or its accessory building among permit exceptions. Confirm the actual scope and other requirements; do not extend that wording to every commercial alteration.
That is a different scope from replacement in a retained opening. Describe the surrounding construction and proposed change to the City when confirming requirements before work.
No. Burlington distinguishes designated properties from non-designated register entries. Check the actual property and applicable district information, and ask Heritage staff about the proposed alteration.
Yes. Explain the entrance function, movement and closing complaint, and provide an authorized contact. Hardware and the supported leaf are assessed together.
Provide the authorized building contact, existing specification, permission information and access procedures before replacement components are selected.
Not necessarily. The leaf alignment, threshold and surrounding condition also need assessment. Describe the location and associated operating symptoms so the repair scope remains clear.
We can help describe damage and the agreed repair. The insurer and policy determine coverage and reimbursement; approval is not guaranteed.
Also in this area
Nearby
If you are on the edge of Burlington, we cover the municipalities around it too.
Call (647) 643-5837 and describe what is happening, or send a photo through the form.