Jordan Kaufman

“What a wonderful company, David looked after my issues with 4 doors so quickly and professionally I couldn’t be more happy. Total gentleman and the company is responsible and timely with appointments and booking. You can’t go wrong!”
Open
Residential and commercial · York Region
Arrange an assessment of an existing residential or commercial door in Richmond Hill. We establish the support and operating fault, explain what can remain and distinguish mechanical repair from replacing glass or changing an entrance system.
Leave your details and get $50 off your first repair.
Original customer reviews
Customer reviews
Relevant customer work from across our service area. These reviews are not presented as jobs from this specific city.
Open a review to read the original customer feedback.
Read more customer reviews






















Work at these locations includes jobs through facilities contractors. Logos belong to their owners; no affiliation, sponsorship or endorsement is implied.
Our service
A door that sticks, drags on the floor or will not latch may have a hardware, alignment or frame problem.
We start with the reveal, the gap running around the door, which should stay even from top to bottom. Uneven gaps point to hinge wear, a racked frame or a settled floor. We check hinge screws, jamb plumb and strike position before touching anything, so the repair addresses the cause rather than the symptom.
Loose or worn hinges can make a door stick. We check the hinges, fixings and frame alignment before choosing the repair. Depending on the fault, we secure the fixings, adjust the door or replace damaged hinges.
If a door needs pulling or lifting unexpectedly to lock, we assess its support, latch and strike together. Some multipoint locks require the handle to be lifted as part of normal operation. We identify the mechanism and cause before recommending alignment work or replacement hardware.
Torn or compressed weatherstripping is the usual source of a draft you can feel with your hand. We fit jamb seal in the correct profile for your frame, replace the door sweep, and reset an adjustable threshold so it seals without dragging the sweep to pieces. Rotted sill wood is rebuilt before new seal goes on.
We inspect damaged jambs, frames and door slabs before recommending repair or replacement. The assessment considers the extent of the damage, the condition of the fixing points and any fire rating or security requirements. Reinforcement, patching or adjustment is considered only where suitable for that door and frame; otherwise we explain the replacement scope.
On commercial and multi-unit doors we adjust the closer arm for sweep speed, latch speed and backcheck so the door shuts fully without slamming. Leaking closers are replaced rather than topped up. We also service panic hardware, floor pivots and hold-open arms, and set closing force light enough to stay comfortable to use.
Richmond Hill's older core along Yonge Street sits beside newer hillside subdivisions climbing toward Oak Ridges, giving the town a mix of 1960s brick homes and 2000s-era vinyl-clad builds.
Every job starts with a diagnosis and a price you approve before work begins. What moves the number is which hardware failed, whether the part is stocked or has to be matched and ordered, the condition of the frame, and after-hours callouts.
Door repair in Richmond Hill starts with the opening that needs attention and the functions it is meant to perform. Explain whether the leaf rubs its frame, misses the receiving latch opening, fails to close predictably or has been damaged by impact. Tell us if it is a house entrance, an interior door, a suite entrance or a business passage. Include whether it can currently be secured and any changes made before the fault appeared. A familiar handle design does not identify the complete installed assembly.
Door N Window serves homes and businesses throughout Richmond Hill and provides door and window services across the GTA. We are insured and WSIB Covered, with 24/7 availability and same-day service available. If a door cannot be secured, explain that at first contact. An urgent securing arrangement and the permanent repair may involve different work. Suitable replacement components need identification; an available assessment does not mean every unidentified part can be installed immediately.
Richmond Hill's Cultural Heritage Planning guidance generally prefers repair of original features and work that avoids permanent damage to heritage fabric. For an applicable entrance, ask the condition assessment to identify whether the original leaf and relevant details can remain. If replacement is recommended, request the observed reason that retaining them is unsuitable. A worn operating component and a proposal to remove the complete door should not be described as the same change.
The City says alterations affecting designated heritage attributes need the applicable written consent before work. Confirm the property's actual status and the proposed alteration with Heritage staff. The register distinguishes listed and designated properties and is updated periodically; an old description or photograph does not settle the current status. For a property in the Gormley conservation district, use the actual boundary and applicable plan. Keep that direction with the door information so the proposed work and permitted changes remain clear.
For an entrance with retained architectural details, explain the operating complaint alongside any known restrictions on the leaf, visible hardware, glazing or surrounding trim. A component that appears mechanically convenient may require altered preparation or a visible change. Provide available property guidance before ordering. The assessment should distinguish adjustment, compatible component replacement and larger alterations so an initially narrow complaint does not quietly become a new entrance project.
Do not assume the word repair establishes an approval exemption. Conversely, do not assume every entry on a heritage register has the same designation or protected features. Ask for direction on the actual proposal where necessary. A clear retained-versus-changed component list helps the owner coordinate physical work and permission without treating a neighbourhood name as a specification. Product photographs support preparation, but they do not authorize removal or confirm the installed support behind visible trim.
When a leaf drops or rubs, its latch can miss the receiving opening even if the locking component has not failed. Tell us where contact occurs during ordinary closing and whether the handle behaves differently when the leaf is aligned. Do not repeatedly slam, lift or force the door to demonstrate the problem. Hinges, pivots, fastenings, frame condition and receiving hardware need assessment before deciding what adjustment or compatible replacement is appropriate.
Ask the repair proposal to identify the initiating condition and any secondary damage. A new latch does not establish a complete repair if the leaf remains unsupported, while an isolated hardware fault does not automatically require replacing the whole entrance. For paired doors, identify the normally active leaf and the second leaf's securing arrangement. Their meeting edges affect closing and locking, so the technician needs the complete opening described rather than information about only the more frequently used handle.
If a door closes sharply, fails to complete its closing movement or will not latch, describe each part of the behaviour. Provide known closer or hinge information without opening housings or changing settings. A closing complaint can involve support and alignment as well as the visible device. Keep the intended normal functions clear in the scope, including which components are being retained and what condition will be checked before replacement equipment is selected.
Drafts or moisture near an entrance also need their location described. Report damaged seals, threshold condition and any associated rubbing or failure to latch. A new seal does not necessarily resolve surrounding damage, poor alignment or a separate water path. The proposal should distinguish door-related sealing from other construction needing investigation. Do not remove retaining parts or create a new opening to locate a concealed marking before the technician has assessed the installed assembly.
For a Richmond Hill business, name the affected entrance and authorized coordinating person. Explain how staff and customers normally use it and whether another authorized route is available during the visit. The commercial door repair guide covers mechanical support, closing and hardware faults. A door containing glass is still a supported moving assembly; glazing damage and mechanical faults need separate descriptions if both are present.
Report powered assistance or access control alongside ordinary movement complaints. The automatic door repair service covers operator problems. Explain the activation behaviour without opening control housings or changing system settings. Successful activation does not prove that a dragging leaf, damaged receiving frame or failed latch has been restored. Keep proposed operator work, leaf support and securing work separately identified so preparation and handover concern the actual affected functions.
For a condominium, apartment or other managed property, clarify whether the affected opening is a suite entrance or a shared door. Ask the authorized building contact to establish responsibility and permitted specifications for changed components. The occupant's ability to unlock a door does not itself authorize a replacement closer or different locking arrangement. Provide existing door information, contractor entry procedures and working-area limitations before parts are selected.
Keep access arrangements with the responsible coordinating person. Do not wedge a shared door or defeat its closing function to simplify an appointment. Report a complaint affecting safe use promptly to the building contact. A mechanical repair addresses its agreed scope and does not certify every unrelated fire, access or accessibility system in the building. Identify any wider alteration as its own project rather than infer it has been reviewed through a narrow repair enquiry.
For damaged glazing in an entrance, door glass replacement addresses glass construction and retention; mention any accompanying support or frame damage. Fixed frontage glazing belongs with Richmond Hill storefront glass. Sliding patio movement belongs with Richmond Hill patio door repair, where tracks and rollers differ from hinged-door support. List separate openings individually instead of assuming their components match because their dimensions look similar.
Before work begins, agree the retained components, replacements and intended operating functions. At handover, review movement, closing and securing covered by the repair with the technician and coordinating contact. Keep temporary protection or parts awaiting supply explicit. We can help with insurance paperwork describing damage and the agreed repair; policy coverage and reimbursement remain decisions for the insurer.
Read project descriptions and original customer feedback about door, window and glass work.
View project descriptionsExplore repair options for doors, windows and glass. Explore our services.
How it works
Call or send the details. Photos are helpful, but optional.
We assess the job on site. You approve the price before paid work starts.
We secure unsafe openings and arrange the agreed repair or installation.
An itemised invoice describing the work.
Door, window and glass work for homes and businesses. Insured, WSIB Covered and available 24/7.
Insurance claims
After a break-in or property damage, we help with paperwork describing the damage and repair.
Coverage and reimbursement depend on your policy and your insurer's approval.
How we help with your claimService areas
Residential and commercial service across Toronto, Peel, York, Durham and Halton, plus Hamilton, Barrie and nearby communities.
FAQ
Local answers first, then the ones that apply everywhere.
Yes. We serve homes and businesses throughout Richmond Hill and across the GTA. Explain the affected opening, its use and operating complaint.
It may remain where its condition and supporting frame are suitable. The assessment identifies the required support, alignment or hardware work before confirming the retained components.
Confirm the actual property status and proposed alteration with the City. Richmond Hill generally prefers repair of original features where appropriate; changes affecting designated attributes require the applicable consent.
Not necessarily. The City register is updated periodically. Check the actual listed or designated status and any applicable district information before approving changes.
Check whether the property falls within the conservation district boundary and consult its applicable plan and City direction. The community name alone is not a door specification.
Support or frame alignment may affect engagement, or hardware may also be damaged. Report those symptoms together so the cause is assessed before a replacement is selected.
Yes. Describe the entrance function, movement, closing and securing complaint, and provide an authorized coordinating contact.
Yes. Activation behaviour and leaf-support or locking complaints need separate descriptions. A responding operator does not prove every door function is suitable.
Provide the authorized building contact, specifications and entry procedures. Management should clarify responsibility and permission for proposed component changes.
We can help describe damage and the agreed repair. Your insurer and policy determine coverage and reimbursement; approval is not guaranteed.
Also in this area
Call (647) 643-5837 and describe what is happening, or send a photo through the form.