Jordan Kaufman

“What a wonderful company, David looked after my issues with 4 doors so quickly and professionally I couldn’t be more happy. Total gentleman and the company is responsible and timely with appointments and booking. You can’t go wrong!”
Open
Residential and commercial · York Region
Get an existing door assessed for support, movement, closing and locking faults. We serve homes and businesses throughout Markham and distinguish a mechanical repair from changing a protected entrance, replacing its glass or altering an automatic operating system.
Leave your details and get $50 off your first repair.
Original customer reviews
Customer reviews
Relevant customer work from across our service area. These reviews are not presented as jobs from this specific city.
Open a review to read the original customer feedback.
Read more customer reviews






















Work at these locations includes jobs through facilities contractors. Logos belong to their owners; no affiliation, sponsorship or endorsement is implied.
Our service
A door that sticks, drags on the floor or will not latch may have a hardware, alignment or frame problem.
We start with the reveal, the gap running around the door, which should stay even from top to bottom. Uneven gaps point to hinge wear, a racked frame or a settled floor. We check hinge screws, jamb plumb and strike position before touching anything, so the repair addresses the cause rather than the symptom.
Loose or worn hinges can make a door stick. We check the hinges, fixings and frame alignment before choosing the repair. Depending on the fault, we secure the fixings, adjust the door or replace damaged hinges.
If a door needs pulling or lifting unexpectedly to lock, we assess its support, latch and strike together. Some multipoint locks require the handle to be lifted as part of normal operation. We identify the mechanism and cause before recommending alignment work or replacement hardware.
Torn or compressed weatherstripping is the usual source of a draft you can feel with your hand. We fit jamb seal in the correct profile for your frame, replace the door sweep, and reset an adjustable threshold so it seals without dragging the sweep to pieces. Rotted sill wood is rebuilt before new seal goes on.
We inspect damaged jambs, frames and door slabs before recommending repair or replacement. The assessment considers the extent of the damage, the condition of the fixing points and any fire rating or security requirements. Reinforcement, patching or adjustment is considered only where suitable for that door and frame; otherwise we explain the replacement scope.
On commercial and multi-unit doors we adjust the closer arm for sweep speed, latch speed and backcheck so the door shuts fully without slamming. Leaking closers are replaced rather than topped up. We also service panic hardware, floor pivots and hold-open arms, and set closing force light enough to stay comfortable to use.
Markham pairs tech-sector office parks with residential blocks that range from older subdivisions to newer planned communities.
Every job starts with a diagnosis and a price you approve before work begins. What moves the number is which hardware failed, whether the part is stocked or has to be matched and ordered, the condition of the frame, and after-hours callouts.
Door repair in Markham should be based on the installed assembly rather than a replacement handle chosen before inspection. Identify which entrance has the problem and who uses it: a house front door, a suite entrance, an interior passage or a business entrance. Explain whether it catches against the frame, fails to latch, closes sharply or has visible impact damage. Include what changed before the complaint began, such as an impact or other building work, without assuming that event explains every defect.
Door N Window repairs residential and commercial doors throughout Markham and serves all the GTA. We are insured and WSIB Covered, with 24/7 availability and same-day service available. Service availability does not confirm that a particular component is ready for installation before its specification has been established. If an entrance cannot be secured, report that first. Temporary attention to an exposed opening and its eventual permanent repair can require separate arrangements.
At a protected property, the difference between restoring operation and changing an exterior feature needs to be explicit. Markham's Heritage Permit guidance lists removal and replacement of doors among examples requiring a Minor Heritage Permit. It also identifies exterior repairs that change a building's appearance. Do not approve a complete substitute leaf simply because the original complaint was described as a sticking door.
Ask the repair assessment to identify what remains: the existing leaf, frame, glazing, visible hardware or another feature. If a proposed component changes appearance or requires altered preparation, document that change before ordering. The City's exemptions for some maintenance activities do not establish that every door repair, hardware substitution or whole-door replacement is exempt. Ask Heritage staff about the specific proposal where required. A clear distinction between retained components and new alterations helps the owner address permission alongside the physical repair.
The City provides a Heritage Property Register and maps for Buttonville, Markham Village, Thornhill and Unionville conservation districts through its permit page. Consult the actual property information and applicable district plan. The guidance applies to designated properties and to properties within the districts, including properties that are not themselves identified as heritage buildings. A modern-looking entrance or the absence of an obvious old door is therefore not enough to decide that the district process is irrelevant.
Share known constraints and any existing approval information with the person assessing the entrance. Photographs can show visible details for preparation, but they do not establish a property's legal status or authorize removal. Keep the actual opening description with the City's scope-specific direction. Your property's facts must guide the proposed work.
A door that catches may have a leaf-support problem, an out-of-position frame, damaged hardware or more than one defect. Describe the point of contact and whether the latch engages during ordinary use. Do not repeatedly slam the door to demonstrate the complaint or remove a hinge to expose hidden damage. The technician needs to assess how the leaf is supported before deciding whether adjustment, a suitable replacement component or more substantial frame work is appropriate.
For a paired entrance, identify the usual active leaf and how the second leaf is held closed. Misalignment at the meeting edges can affect the receiving hardware even when the handle appears intact. The repair proposal should distinguish the initiating problem from secondary damage. Installing a new latch without correcting unsuitable support can leave the same complaint behind. Conversely, not every locking fault requires a new complete door: the observed condition and compatible components determine what can sensibly remain.
For a Markham business, tell us whether the affected entrance is used by the public, staff or both and identify the person authorized to approve work. Record whether it drags, fails to secure, has a damaged pivot or hinge, or has an abrupt closing movement. The commercial door repair service covers that hardware and support scope. A shop door containing a glass panel still has mechanical components that need their own assessment.
If a powered operator or activation button is present, explain the activation behaviour as well as how the door moves during normal permitted use. Use automatic door repair for the operator complaint. A powered system and the supported leaf work together, but successful activation does not prove that the latch, support or closing action is suitable. Keep the planned mechanical work and any operator or access-control work identified separately so the right components and coordinating arrangements can be prepared.
In a condominium or other managed building, clarify which door is affected and obtain the authorized building contact's direction about responsibility and permitted components. A suite entrance and a shared lobby entrance may have different management arrangements. Provide an existing hardware or door specification if available. Do not assume that the person holding the key can authorize a changed leaf, closer or locking arrangement, and do not select replacement equipment solely because its external shape resembles the installed part.
Explain known contractor entry procedures, the access route and any working-area limitations before the visit. The coordinating contact should identify how people will use the building while the entrance is assessed or repaired. Do not defeat closing or exit functions to provide temporary convenience. If a complaint affects safe passage, tell the responsible building contact immediately. The repair assessment is not a certification of all the building's fire, access or accessibility arrangements; any wider requirements need their proper review.
Where the principal problem is damaged glass in a door, the glazing construction and its retention need assessment. The door glass replacement guide explains that service, including why the supporting door condition matters. Fixed shopfront framing belongs with Markham storefront glass. A visible crack does not establish that only the glass is damaged, so mention accompanying frame distortion or operating complaints when contacting us.
Sliding patio movement uses a different support and track arrangement from a hinged entrance. Use Markham patio door repair when that is the affected assembly. List separate openings individually if the property needs several repairs. Similar handles and door sizes do not establish that their internal components match. A clear opening list helps the technician distinguish which parts are retained and which complaint belongs to which entrance.
Agree the intended repair functions before work starts, including which identified components are being addressed and which alterations or further parts remain outside the scope. At handover, review normal movement, closing and locking for the work that was agreed. Keep any temporary securing, remaining damage or later appointment explicit. We can help with paperwork describing door damage and the repair; insurance coverage and reimbursement depend on the policy and insurer.
Read project descriptions and original customer feedback about door, window and glass work.
View project descriptionsExplore repair options for doors, windows and glass. Explore our services.
How it works
Call or send the details. Photos are helpful, but optional.
We assess the job on site. You approve the price before paid work starts.
We secure unsafe openings and arrange the agreed repair or installation.
An itemised invoice describing the work.
Door, window and glass work for homes and businesses. Insured, WSIB Covered and available 24/7.
Insurance claims
After a break-in or property damage, we help with paperwork describing the damage and repair.
Coverage and reimbursement depend on your policy and your insurer's approval.
How we help with your claimService areas
Residential and commercial service across Toronto, Peel, York, Durham and Halton, plus Hamilton, Barrie and nearby communities.
FAQ
Local answers first, then the ones that apply everywhere.
Yes. We serve homes and businesses across Markham and the GTA. Identify the affected entrance and its operating or damage complaint when contacting us.
No. Support, alignment or hardware repair may be appropriate, but the leaf and frame need assessment before the retained and replacement components can be confirmed.
Check the actual property information and relevant heritage district plan with the City. Markham lists removal and replacement of doors among projects requiring a Minor Heritage Permit on applicable properties.
Yes. The City guidance covers properties within the conservation districts, including non-heritage properties. Confirm the specific exterior alteration rather than judge permission from the building appearance.
It does not establish permission for a whole-door change. Describe the door proposal separately and consult the applicable City guidance or Heritage staff.
Support or frame alignment may be preventing engagement, or the locking components may be damaged. Report rubbing, movement and the closing behaviour so the cause can be assessed.
Yes. Explain both the manual mechanical complaint and the activation behaviour. Operator work and leaf-support or locking work need their respective scope established.
Provide the authorized building contact, existing specification and access procedures. Management should clarify responsibility and permission for proposed component changes.
Yes. An exposed or unsecured entrance may need temporary attention while the permanent scope and compatible parts are confirmed. The two stages are explained separately.
We can help describe the damage and agreed repair work. The insurer and policy determine coverage and reimbursement; approval is not guaranteed.
Also in this area
Nearby
If you are on the edge of Markham, we cover the municipalities around it too.
Call (647) 643-5837 and describe what is happening, or send a photo through the form.