Jordan Kaufman

“What a wonderful company, David looked after my issues with 4 doors so quickly and professionally I couldn’t be more happy. Total gentleman and the company is responsible and timely with appointments and booking. You can’t go wrong!”
Open
Residential and commercial · Simcoe County
We repair residential and commercial doors across Barrie, checking support, closing and release while distinguishing retained-opening repairs from wider entrance alterations.
Leave your details and get $50 off your first repair.
Original customer reviews
Customer reviews
Relevant customer work from across our service area. These reviews are not presented as jobs from this specific city.
Open a review to read the original customer feedback.
Read more customer reviews






















Work at these locations includes jobs through facilities contractors. Logos belong to their owners; no affiliation, sponsorship or endorsement is implied.
Our service
A door that sticks, drags on the floor or will not latch may have a hardware, alignment or frame problem.
We start with the reveal, the gap running around the door, which should stay even from top to bottom. Uneven gaps point to hinge wear, a racked frame or a settled floor. We check hinge screws, jamb plumb and strike position before touching anything, so the repair addresses the cause rather than the symptom.
Loose or worn hinges can make a door stick. We check the hinges, fixings and frame alignment before choosing the repair. Depending on the fault, we secure the fixings, adjust the door or replace damaged hinges.
If a door needs pulling or lifting unexpectedly to lock, we assess its support, latch and strike together. Some multipoint locks require the handle to be lifted as part of normal operation. We identify the mechanism and cause before recommending alignment work or replacement hardware.
Torn or compressed weatherstripping is the usual source of a draft you can feel with your hand. We fit jamb seal in the correct profile for your frame, replace the door sweep, and reset an adjustable threshold so it seals without dragging the sweep to pieces. Rotted sill wood is rebuilt before new seal goes on.
We inspect damaged jambs, frames and door slabs before recommending repair or replacement. The assessment considers the extent of the damage, the condition of the fixing points and any fire rating or security requirements. Reinforcement, patching or adjustment is considered only where suitable for that door and frame; otherwise we explain the replacement scope.
On commercial and multi-unit doors we adjust the closer arm for sweep speed, latch speed and backcheck so the door shuts fully without slamming. Leaking closers are replaced rather than topped up. We also service panic hardware, floor pivots and hold-open arms, and set closing force light enough to stay comfortable to use.
Barrie's waterfront downtown holds a mix of older buildings converted to shops and apartments, while the rest of the city has expanded rapidly outward with subdivisions from every decade since the 1970s.
Every job starts with a diagnosis and a price you approve before work begins. What moves the number is which hardware failed, whether the part is stocked or has to be matched and ordered, the condition of the frame, and after-hours callouts.
Door repair in Barrie concerns the operating opening: the leaf, its support, the frame relationship and the hardware used to close and release it. Explain whether the affected doorway serves a home, a shared building, a business entrance or an industrial pedestrian passage. Describe what happens without forcing the mechanism. A leaf that drags before it reaches the frame has a different complaint from one that moves normally but cannot latch. The assessment should connect the symptom to the installed arrangement.
Door N Window provides residential and commercial door, window and glass repair and replacement across Barrie and the GTA. We are insured and WSIB Covered, with availability 24/7 and same-day service available. Provide the location, opening condition and authorized access when booking. We serve properties throughout the city. Permanent repair timing depends on the identified components and access, rather than a general availability statement.
Barrie's residential building permit guidance lists replacing doors or windows of the same existing size as not requiring a permit. It lists new or enlarged openings and construction of an entrance or exit as work requiring one. The City says these residential lists are not exhaustive and directs project questions to Service Barrie. Confirm your actual proposal, including any structural work or other approvals, instead of treating the list as permission for an undefined alteration.
For example, correcting an installed door's support and proposing a different entrance arrangement should be described separately. If the wider plan changes a wall opening, landing or access arrangement, identify the coordinating provider before a new leaf and frame are ordered. Measuring the existing opening does not establish the finished dimensions of a future alteration. A hardware service visit should not quietly become a construction proposal with unresolved scope or permissions.
The residential same-size replacement entry should not be applied automatically to a commercial building. Barrie's industrial, commercial and institutional permit page provides separate resources, including a commercial tenant fit-up checklist and interior alteration checklists. Bring the actual business project to the responsible designer or Service Barrie when the entrance work is part of a wider alteration. This distinguishes repair of installed hardware from the requirements for a changed unit.
Keep available approved drawings and opening information with the building contact. Tell us if another provider is changing surrounding construction or access systems. The service description should identify which work can proceed on the retained opening and which depends on that wider project. Confirm the commercial project requirements separately from residential examples. For replacement planning, our commercial door installation guide explains the specification decisions.
Describe where a dragging leaf touches: near the top, at its meeting edge or against the floor. Explain whether the condition followed an impact, previous hardware work or another change you know about. The technician should assess hinges or pivots, their preparation and the leaf-to-frame relationship together. Adding force through a handle or closer is not a correction for displaced support. Avoid removing components to produce measurements for the booking enquiry.
A loose attachment needs the material behind it considered. Tightening an accessible screw may not restore damaged preparation or a distorted leaf. For a steel pedestrian opening, our commercial steel door repair guide covers retained leaf and hollow metal frame decisions. Keep an industrial entrance or passage-door enquiry separate from rolling or sectional equipment. The proposed work should identify the actual support and construction being retained rather than group all industrial openings under one repair label.
A closer can leak, develop a loose attachment or fail to control movement as intended. Explain whether the door moves too rapidly, stops before closing or needs a final push to latch. The door closer repair service addresses the mechanism and installed arrangement. A compatible closer should be considered with the leaf and its support; changing it alone may leave binding or poor alignment unresolved.
If the leaf reaches the frame normally, note whether the latch meets its receiver and whether the handle releases it reliably. Do not file the strike or disable latching to compensate for a fault. At a managed or working building, identify the responsible contact and any associated entry equipment. The assessment should distinguish a mechanical release problem from a connected access-system complaint. Existing labels and available specifications can help direct that enquiry without assuming interchangeable hardware from appearance alone.
A glazed door can have damaged glass while also needing support or closing work. Our door glass replacement service addresses the panel and retaining arrangement. Report any movement complaint that existed before the glazing damage so the proposal identifies both issues. Glass replacement does not automatically renew hinges, a closer or latch preparation. Keep people away from unstable glass instead of operating the damaged leaf repeatedly to demonstrate the fault.
Fixed frontage panels belong with Barrie storefront glass. An entrance using a button or sensor needs the automatic door repair service, alongside any manual support assessment. Describe which system fails and avoid repeated testing of unpredictable powered movement. These service distinctions help prepare the correct opening assessment without claiming that one component replacement solves every complaint at the entrance.
Explain who authorizes work, when the doorway is normally used and any restriction on taking it out of ordinary use. For a business, identify deliveries and staff or visitor access affected by the work. A different doorway should not be assumed suitable for everyone from a photograph. The responsible building contact should clarify the arrangement while repairs are carried out or components are awaited. At a home, describe whether the affected opening is the only practical entrance.
After the agreed work, retain the opening description and supplied component information. Review the relevant movement, closing and release actions, and keep temporary protection separate from completed permanent work. Ask which limitations remain if another stage is needed. We can help with repair-related insurance claim paperwork, while the insurer determines coverage. A returning symptom should be reported rather than accommodated with additional force.
Read project descriptions and original customer feedback about door, window and glass work.
View project descriptionsExplore repair options for doors, windows and glass. Explore our services.
How it works
Call or send the details. Photos are helpful, but optional.
We assess the job on site. You approve the price before paid work starts.
We secure unsafe openings and arrange the agreed repair or installation.
An itemised invoice describing the work.
Door, window and glass work for homes and businesses. Insured, WSIB Covered and available 24/7.
Insurance claims
After a break-in or property damage, we help with paperwork describing the damage and repair.
Coverage and reimbursement depend on your policy and your insurer's approval.
How we help with your claimService areas
Residential and commercial service across Toronto, Peel, York, Durham and Halton, plus Hamilton, Barrie and nearby communities.
FAQ
Local answers first, then the ones that apply everywhere.
Yes. We provide door, window and glass repair and replacement across the city and GTA. Explain the doorway, condition and authorized access when booking.
Its residential guidance lists replacement of doors or windows of the same existing size as not requiring a permit. The list is not exhaustive; confirm your actual scope and any other approvals with Service Barrie.
Barrie lists new or enlarged openings and construction of an entrance or exit as requiring a permit in its residential guidance. Keep that construction proposal separate from hardware repair.
No. Barrie provides separate commercial and institutional project resources. Ask about the actual commercial alteration instead of assuming the residential example decides it.
The material and existing preparation affect whether the attachment can hold properly. A different hinge or extra tightening may not resolve damaged support.
Yes. Describe the leaf, frame and passage function. This scope concerns entrance and passage doors, and should be distinguished from rolling or sectional equipment.
Not necessarily. Supporting hardware and the leaf-to-frame relationship need consideration alongside the closer and latching action.
Report both complaints. Glass, support and closing hardware are separate components, and the agreed work should identify each included repair.
Automatic door repair addresses powered operation and associated controls. Describe manual and powered symptoms and avoid repeatedly testing unpredictable movement.
Ask which work is complete, what remains temporary and any remaining restrictions. Keep the opening and component description for follow-up service and relevant insurance paperwork.
Also in this area
Nearby
If you are on the edge of Barrie, we cover the municipalities around it too.
Call (647) 643-5837 and describe what is happening, or send a photo through the form.